Brand new aftermarket stator
- Direct replacement to your original unit
- Plug-and-play, direct fit, easy installation.
- Highest grade lamination materials
- Highest grade copper windings, resistant to 200 degrees Celsius.
- Pick up pulsar coil included
- Connector included
- Rubber grommet included
- All products shipped are tested
- Interior diameter: 42mm
- Exterior diameter: 107mm
- Thickness: 22mm
- Length of wires stator to grommet: 60mm
- Length of wires grommet to plug: 180mm
- Length of pickup coil's wire to grommet: 20mm
- Number of wires: 6
- Number of plugs: 3
- Number of pins: 10
Wire to wire resistance:
- Alternator: Black to Black = 0.6 ohms +/-20%
- Pickup: White/Yellow to Blue/Yellow = 232 ohms +/-20%
Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.
- All electrical components must be fitted by a qualified technician.
- Before fitting electrical components ensure the root cause of the original failure has been addressed.
- The absence of either of points 1 or 2 above, will void any warranty.