Sena RC4 Support

Frequently Asked Questions

GETTING STARTED

If your handlebar requires better grip for holding the RC4 in place, apply the rubber band around the handlebar.

Type: CR2016 Lithium coin battery

PAIRING

1. Turn on the 10S and the RC3.

2. Press the Jog Dial for 10 seconds to enter the configuration menu. Rotate the Jog Dial until you hear a voice prompt saying, "Remote control pairing". Press the Phone Button to enter into Remote Control Pairing mode and the red LED will flash rapidly and you will hear multiple beeps.

3. On the RC3, press the (+) Button for 8 seconds until its LED flashes red. The 10S will automatically perform pairing with the RC3 in pairing mode. You will hear a voice prompt, "Remote control connected" when they are successfully connected.

1. Turn on the 10C and the RC3.

2. Press the Jog Dial for 10 seconds to enter the configuration menu. Rotate the Jog Dial until you hear a voice prompt saying, "Remote control pairing". Press the Phone Button to enter into Remote Control Pairing mode and the red LED will flash rapidly and you will hear multiple beeps.

3. On the RC3, press the (+) Button for 8 seconds until its LED flashes red. The 10C will automatically perform pairing with the RC3 in pairing mode. You will hear a voice prompt, "Remote control connected" when they are successfully connected.

1. Turn on the 10R and the RC3.

2. Press the Center Button for 10 seconds to enter the configuration menu. Tap the (+) Button or the (-) Button until you hear a voice prompt saying, "Remote control pairing". Press the Center Button to enter into Remote Control Pairing mode and the red LED will flash rapidly and you will hear multiple beeps.

3. On the RC3, press the (+) Button for 8 seconds until its LED flashes red. The 10R will automatically perform pairing with the RC3 in pairing mode. You will hear a voice prompt, "Remote control connected" when they are successfully connected.

1. Turn on the 10U and the RC3.

2. Press the (+) Button for 10 seconds to enter the configuration menu. Tap the (+) Button until you hear a voice prompt saying, "Remote control pairing". Press the (-) Button to enter into Remote Control Pairing mode and the red LED will flash rapidly and you will hear multiple beeps.

3. On the RC3, press the (+) Button for 8 seconds until its LED flashes red. The 10U will automatically perform pairing with the RC3 in pairing mode. You will hear a voice prompt, "Remote control connected" when they are successfully connected.

1. Turn on the 20S and the RC3.

2. Press the Jog Dial for 12 seconds to enter the configuration menu. Rotate the Jog Dial until you hear a voice prompt saying, "Remote control pairing". Press the Phone Button to enter into Remote Control Pairing mode and the red LED will flash rapidly and you will hear multiple beeps.

3. On the RC3, press the (+) Button for 8 seconds until its LED flashes red. The 20S will automatically perform pairing with the RC3 in pairing mode. You will hear a voice prompt, "Remote control connected" when they are successfully connected.

 

 

Documents

Quick Start Guide - A quick and easy to use guide for operating your device

Quick Reference Guide

 

 

Instructional Video

Sena RC3 & RC4 Remotes Tech Talk​